Generator and electrical room ventilation
High-flow axial fans for generator halls and for transformer, switchgear and UPS rooms.
Description
Backup diesel generators and gas engines need large volumes of combustion and cooling air, and transformers, switchgear and UPS equipment must stay within their permitted temperatures. These are low-pressure, high-flow duties where axial fans are the most compact solution.
We select the fan and motor for the actual air temperature of each room. In generator halls, ARMO fans can also serve as smoke exhaust fans. For electrical rooms at normal temperatures, B5PA and B6PA wall fans and BTFM tube axial fans are a cost-effective choice.
Typical use cases
- Heat removal and ventilation of diesel and gas engine halls
- Combustion air supply for engines
- Ventilation of transformer and switchgear rooms
- Cooling and ventilation of UPS and electrical rooms
Recommended fans
| BTFM tube axial fans | Ø 400–1,250 mm, 0.37–30 kW, approx. 3,500–115,000 m³/h, 4-pole |
|---|---|
| ARMO-A tube axial fans | Ø 400–1,250 mm, 0.37–45 kW, approx. 5,000–155,000 m³/h, also for smoke exhaust (F300/F400) |
| B5PA wall fans | Ø 500–1,000 mm, 0.55–5.5 kW, approx. 8,500–37,000 m³/h, air up to +40 °C |
| B6PA wall fans | Ø 250–500 mm for smaller rooms, air up to +40 °C |
| Speed control | Frequency converter for three-phase models |
Performance data is based on the manufacturer's catalogue. DCS confirms the final selection for each duty point.
Planning a data centre or upgrading one?
Send us the heat load, air volumes or fan list. We select the fans and send you a proposal.