Smoke exhaust and pressurisation fans
EN 12101-3 certified axial and jet fans for smoke exhaust, staircase pressurisation and purge ventilation.
Description
Escape routes, loading areas and car parks in a data centre need smoke exhaust and pressurisation like any other large building. Rooms protected by gas extinguishing also need purge ventilation to remove the extinguishing gas and combustion products after a discharge.
BVN ARMO fans are certified to EN 12101-3 for F300 and F400 (120 min). The same fan can serve everyday ventilation and emergency smoke exhaust, and it can be fed directly or from a frequency converter. BTFM tube axial fans suit the pressurisation of stairwells and lift shafts.
Typical use cases
- Smoke and heat exhaust from halls, corridors and loading areas
- Pressurisation of stairwells and lift shafts
- Purge ventilation of rooms protected by gas extinguishing
- Car park ventilation with jet fans
Recommended fans
| ARMO-A / ARMO-C / ARMO-R | Duct, cabinet and roof fans Ø 400–1,250 mm, 0.37–45 kW, approx. 5,000–155,000 m³/h, F300/F400 120 min |
|---|---|
| ARMO-JP / ARMO-JR | Axial jet fans Ø 315–400 mm and low-height radial jet fans for car parks with less than 2.4 m headroom |
| BTFM | Tube axial pressurisation fans Ø 400–1,250 mm, 0.37–30 kW, approx. 3,500–115,000 m³/h |
| Motors | WEG W22, IP55, insulation class H (ARMO); 2-, 4- and 6-pole and two-speed versions |
Performance data is based on the manufacturer's catalogue. DCS confirms the final selection for each duty point.
Planning a data centre or upgrading one?
Send us the heat load, air volumes or fan list. We select the fans and send you a proposal.