Skip to Content

← All BVN fans

SF cooling fans

Axial fans from 250 to 910 mm for dry coolers, condensers, radiators and oil coolers.

Description

The SF family (SF, SFX and SFG series) consists of axial fans whose wire guard doubles as the mounting frame; square plate and flat grille versions are also available. The fans are supplied for blowing or suction, and the propeller is coupled directly to the motor. The largest SFG models (630–910 mm) are three-phase and can be connected in star or delta for two speeds.

Three-phase models can be built for frequency-converter operation, so several fans in a cooler can be controlled together. For noise-sensitive sites, the eight-pole SFG 8T 910 runs at about 680 rpm. The optional SF ecoDiff diffuser, only 280 mm high, lowers power consumption and noise at the same duty point, according to the manufacturer.

Typical use cases

  • Dry coolers and air-cooled condensers, including data-centre heat rejection
  • Engine and generator radiators, oil coolers and hydraulic coolers
  • Air-cooled condensers of ORC units and air coils of heat pumps
  • Refrigeration units, chillers and industrial process cooling
  • Replacement fans for existing coolers

Performance range

Diameter250–910 mm
Air flow per fanapprox. 1,000–32,500 m³/h (free blowing)
ExampleSFG 6T 910: 32,500 m³/h free blowing; 20,000 m³/h at about 160 Pa
Motor1~230 V up to 1 kW; 3~400 V up to about 2.5 kW; 4-, 6- and 8-pole
Ambient temperature−40 °C to +40…+80 °C, depending on model
ProtectionIP54 or IP55, insulation class F
Speed controlVoltage regulator (1~), frequency converter (3~, on request)
EC motorsEC versions on request

Performance data is based on the manufacturer's catalogue. DCS confirms the final selection for each duty point.

Need a fan for your duty point?

Send us the air flow, pressure, air temperature and installation details. We select the fan and send you a quotation.