BGSS centrifugal fans
Robust low-pressure centrifugal fans with backward-curved blades for large air volumes.
Description
BGSS fans have a welded, backward-curved impeller and a powder-coated steel casing. They move large air volumes at low and moderate static pressures and run quietly thanks to the aerodynamic blade profile. Three-phase models can be speed-controlled with a frequency converter.
For smaller duties, the compact ALÇ and ALR series use the same blade type in single- and three-phase versions, and their outlet can be turned to the required direction.
Typical use cases
- Clean-side exhaust fans after bag filters, cartridge filters and scrubbers
- General process exhaust and extraction of odorous or harmful gases
- Ventilation of factories, workshops, mines, tunnels, waste stores and livestock buildings
- Replacement fans for existing extraction systems
Performance range
| Models | BGSS 1–13; compact ALÇ 315–560 and ALR 1–8 |
|---|---|
| Motor power | 0.25–22 kW (ALÇ and ALR 0.18–2.2 kW) |
| Air flow | up to approx. 40,000 m³/h (ALÇ and ALR up to 10,000 m³/h) |
| Static pressure | up to approx. 2,300 Pa (BGSS 13) |
| Max. air temperature | +120 °C |
| Supply | 1~230 V up to 3 kW, 3~380–400 V, 50 Hz |
| Motor | Asynchronous, IP55, insulation class F |
Performance data is based on the manufacturer's catalogue. DCS confirms the final selection for each duty point.
Need a fan for your duty point?
Send us the air flow, pressure, air temperature and installation details. We select the fan and send you a quotation.